Undergoung Utilities and their Standard Colors

Underground utilities can easily be identified today. Before, it was difficult to do so and people were at risk if they try to make a dig without being able to identify all the lines underneath the land. There is reduced risks today because of new methods of identifying utility lines although not a complete reduction. It is thus important that we know how to identify these underground utilities if there is a need to dig the ground so that you can prevent harm. Before digging through a certain piece of land, the OSHA requires that the underground utilities be located. It is to prevent disaster. If you hit any of the underground utility lines while digging then you can be fatally injured. The location of the areas where the lines were struck can experience service interruption. To prevent these types of incidents, it is important for property owners to call 811 so utility companies can identify their undergoing lines. When the number is called, you can let the utility companies come out and mark their respective lines.

Marking lines may lessen the risks but there are time when accidents still happen. The reality is that there is an incident almost every 6 minutes where utility line are struck. When this happens, it affects traffic lights, wastewater pipes, telecommunication lines and more. These incidents affect public health and safety.

With the use of GPR or Ground Penetrating Radar, companies can locate utility lines. With this machine, companies can easily locate utility lines. However, for the ordinary homeowner, it is enough to simply call 811 to be able to let companies located their lines.

Today, utility lines are marked with different colors for easy identification. Here are the colors used for different utilities.

Proposed excavation sites use white lines. It locates areas that will be excavated in the near future.

Pink lines are temporary survey markings. Legal property boundaries are marked off by these pink lines.

If you see red lines, then you can be sure that these are electric power lines, cable, conduit, and lighting cables. The color red is perfect for electric works because it is associated with fire and danger.

Yellow lines are used for gas, oil, steam, petroleum, and gaseous materials. Bright yellow is an appropriate warning color since it is very disastrous to have a natural gas leak.

Communication, alarm, signal lines, cable, or conduit use orange lines. If you see blue lines then these are lines for potable water. Purple lines are used for reclaimed water, irrigation, and slurry lines. Sewer and drain lines use the color green. A project can be derailed for a long time when these utility lines are hit.

You can learn more about the color coding of utility lines if you click here now! View here for more.

Source: hop over to here